40430 Media Handler MDH: Cannot open exit door because an unpicked plate is detected. Please remove all plates from the plate buffer load table. Trendsetter_400/800 Trendsetter_400/800_ContinuousLoad Trendsetter_NEWS This error is reported when the device is attempting to open the exit door but the firmware detects that an unpicked plate is sitting on the plate buffer load table. The plate stack sensor status may be checked by using the <<picker>> command. If the device is trying to manually unload or release a loaded plate, remove the unpicked plate from the buffer load table and select the RESUME button on the workstation dialog box to continue. If the device is trying to load the plate on the plate buffer table, then there may be a problem with the picker vacuum pressure sensor or the plate stack sensor(s). This error is reported. Unpicked plate needs to be removed from buffer load table. Faulty picker vacuum pressure sensor. Faulty plate stack sensor(s). 23-Jul-2003 Created. ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:26 2008 PST